Wednesday, 15 October 2008

API 650 11th Edition Addendum 1

6.9

If you design a storage tank before, you are familiar with API 650 code. This code used for design of welded steel tanks for oil storage.

API 650 2007 Edition is valid now, but if you want to use this version, you must beware twice. Because, this edition has many misprints especially at Seismic Section. Also, with this edition the seismic section was completely changed. Before this edition, API used UBC 1997 code for seismic calculations. After this edition, API changed to ASCE 2005 for seismic and wind calculations.

API has not issued yet any addendum or errata for this edition.

But, they prepared a draft addendum document for 2007 Edition. If you want to use API 650 2007 Edition, you must read Addendum 1. Please note that, this addendum is in draft issue!

Permalink | Fatih BAZMAN | Add your comment | Tags : Storage Tanks API 650 2007

The First Post | Calculations Tab is Running

Comments

when will it be issued as final?

Send by Michael Loginer |5 November 2008

Yes, it has been issued as FINAL! You can download it for free.

Send by Fatih BAZMAN |14 November 2008

Some pages are missing in this version because some pages are not changed in addendum. But, almost is new. Thank you for your sharing

Send by Derek |1 June 2009

Thank you very much

Send by Harshad |24 July 2009

Hello,

Which paragraph or item  shows the shell buckling calculations for welded storage tanks in API 11th Edition?

I couldn't find any information about it.

Waiting your answer as soon as possible.

Send by blue_33 |15 August 2009

API 650 11th Edition Addendum 2 was released. Please check my new post for download.

Send by Fatih BAZMAN |27 May 2010

Add your comment